Konica Minolta IP-711 - Manual (Page 89)

7. Settings and Operations for Scan Functions
80
Scan Operation
You have the choice of two scan operating procedures available selected according
to whether the one-touch key is used to specify the destination or one time key is
used.
■ Specifying the destination using a one-touch key:
1. Press the Scan key on the copier.
2. Select the “Destination” tab.
3. Select the “IndexList” key.
4. Select the target index from the index list. Touch “Enter.” (Registering Index
☞p.110)
5. Select the one-touch key which has been registered for Scan to HDD.
6. Set the scanning mode. (Ref.: Setting the Scanning Mode) ☞p.81
7. Specify the document. (Ref.: Specifying the Document) ☞p.81
8. Press the Start key.
MEMOS
• One-touch key registration is possible from Network Management Utility Light.
• For details of one-touch key registration, see “Advance Registration of
Destinations” of chapter 7. ☞p.110
■ Specifying the destination using a one time key:
The destination may be set using a one time key. ☞p.115
4334P198CA