Konica Minolta IP-711 - Manual (Page 29)

4. Settings Required for Network Printing
20
4.3 Windows Printing Setting
The use of Windows Printing enables direct printing over the Microsoft network.
NOTE
To make the Windows Printing setting, it is necessary to install the NetBEUI
protocol in the PC.
Settings made on the controller side
Make the settings for Windows Printing from Network Management Utility Light.
The setting is necessary for Windows Printing.
1. Start Network Management Utility Light.
2. Enter the password to log on to the Administrator mode.
3. Click the “Network” tab and then select “Common Setting” – “Windows
Configuration.”
4. Make the following settings.
Enable Windows Printing Service:
Set the Windows print service.
Setting values : Enable, Disable
k4334P156CA