Konica Minolta IP-711 - Manual (Page 43)

4. Settings Required for Network Printing
34
•
NetWare 5.x NDS print server mode settings
* To use the print server mode, it is necessary that the IPX protocol have been
loaded in the NetWare server.
1. Log on to the NDS Tree by the Administrator right.
2. Start NWADMIN.
3. Select the container object, either Organization or Organizational Unit, that
offers the print service and select “Print Service Quick Setup” from the tool
menu.
4. Type “Print Sever Name,” “Printer name,” “Print Queue Name,” and “Volume.”
Then, set “Remote Other/Unknown” for the “Type” name of the printer and save
the settings.
* For the queue user rights, printer notification option, assignment of multiple
queues, and password, see the document available for NetWare and set them as
necessary.
5. Using Network Management Utility Light, set the controller as detailed below
and restart it.
Details of Setting:
Enable NetWare : Enable
Frame Type : Auto Detect (Select the frame type according to the
network environment.)
Bindery/NDS : NDS
k4334P166CA