Kenwood XD-A900 - Manual (Page 20)

XD-951/A900/A700 (En)
20
Preparation section
Basic section
Application section
Knowledge sections
Playback of CD
1 Open the tray.
2 Place a disc.
3 Close the tray.
If a disc has already been loaded in the CD player and the
power is OFF, simply pressing the CD play key turns power
automatically ON and starts playback.
The tray opens when the key is pressed
and closes when the key is pressed again.
Let's put out some sound
Playback from desired track
High-speed search in forward and
reverse directions
The label must be on top.
Disc played first when the 6 key is pressed.
Time display on the CD player
Each press of the TIME key of the remote control unit
switches the displayed time information.
Skipping tracks
Playback form desired track
÷ Only the time information related to the track being played
can be displayed in the program, CD EDIT and random
modes.
1
2
3
4
Elapsed time of track being played
Remaining time of track being played
Elapsed time of disc (TOTAL lights up)
Remaining time of disc (TOTAL lights up)
1. Load a disc.
2. Start playback.
1 1
2 2
TIME
To stop Playback
0
1 1
2 2
^
1 2 3 :
- 2 3 7 :
2 3 4 5 :
- 3 6 1 5 :
÷ After a few seconds, play starts from track No.1.