Searching for the desired music program (dpss), Searching for the desired music program, Dpss) – Kenwood XD-A900 User Manual

Page 25

Advertising
background image

XD-951/A900/A700 (En)

25

Preparation section

Application section

Knowledge sections

Basic section

Searching for the desired music program

(DPSS)

The DPSS (Direct Program Search System) is capable of detecting non-recorded spaces of more than 4 seconds as “blanks
between programs” and, based on this information, can return to the beginning of the music program being played or the
beginning of a desired program by skipping up to 16 other programs.

The DPSS may not function normally with the following kinds of tape.

÷ Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes.

÷ Tapes containing pianissimo sections, such as classical music tape.

÷ Tapes in which large noise is recorded in blanks between programs.

÷ Tapes containing blanks between programs that are shorter than 4 seconds.

÷ Tapes recorded at low level.

÷ Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of previous program).

Notes

Notes

To play the next program

: Press once.

To play the 4th program
after the current program

: Press 4 times.

During play in direction

3

To play the next program

: Press once.

To play the 4th program
after the current program

: Press 4 times.

To return to the beginning
of the current program

: Press once.

To play the 4th program
before the current program : Press 5 times.

During play in direction

2

To return to the beginning
of the current program

: Press once.

To play the 4th program
before the current program : Press 5 times.

Let's put out some sound

3

¡

2

1

7

3

¡

2

1

7

Advertising