Kenwood XD-A900 - Manual (Page 58)

XD-951/A900/A700 (En)
58
Preparation section
Application section
Knowledge sections
Adjust the clock before setting the timer.
Adjust the listening volume.
Make preparations for the play (recording).
÷ When the timer function is used for timer recording of an input source,
the speakers do not output the audio even after the unit is turned on by
the timer.
÷ To listen to CD
Insert a disc.
(Program playback is not
possible.)
÷ To listen to tape
Set a tape into deck B.
÷ Playing the auxiliary input
source
Make timer setting of
the component con-
nected to the AUX jacks.
÷ For recording
Make prepara-
tions for record-
ing.
•
÷ To listen to radio
The station should be
preset prior to the
above.
¶
Select the disc to be played
(1, 2 or 3).
÷ Timer reservation is possible for the two types PROG.1 and PROG. 2
at the same time.
÷ Please make reservations with an interval of at least one minute, so that
the operation times of PROG. 1 and PROG. 2 do not overlap.
Timer programming
Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available.
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected to
be activated or not as required.
1
2
Adjust the clock before setting the timer. Y
The B deck has priority at
the time of timer playback.
Timer operation
Select a program No. and press the SET key.
4
÷The selected program No. lights.
÷If a program No. under which a timer program has already been reserved, it is replaced by the new timer program.
÷ If you made a mistake during timer setting:
Select “RETURN” in the time setting or selection item and press the
SET or ENTER key. (This makes it possible to the previous step so the
current step can be restarted.)
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG.1 ...... Program 1
PROG.2 ...... Program 2
AUTO POWER SAVE
Press the TIMER key.
3
Enter the ON time.
5
÷ After entering the figure of “hour” with the procedure in 1 and 2,
enter the figure of “minute” using the same procedure.
1
The time
is advanced.
2
The time
is returned.
A
MULTI
CONTROL
SET
VOLUME
CONTROL
UP
DOWN
TIMER
MULTI
CONTROL
SET
1 G O R P
PROG. 1
A M7 O 0