Kenwood XD-A900 - Manual (Page 50)

XD-951/A900/A700 (En)
50
Preparation section
Application section
Knowledge sections
The Sound Retrieval System is an epochal system which produces a three-dimensional sound space by applying the most
suitable processing to the sound signal on the basis of the human listening mechanism. This permits real depth and sound
location, considered as difficult to realize with conventional 2-channel stereo (general stereo). A sufficient effect can be
obtained for any source (CD, tape, broadcasts, etc.). Recording with applied SRS 3D also is possible.
Experiencing SRS 3D
(Sound Retrieval System)
Enjoying Sound Field Effects
Effective Sound Adjustment
1Set SRS 3D to ON.
Each press of the key switches SRS 3D on
and off alternately.
2Press the MODE/DEMO key.
3Select “SRS LEVEL”.
1. Select.
2. Press SET.
4Adjust the effect strength (level).
1. Adjust.
2. Press ENTER.
÷ SRS 3D ON/OFF switching is not possible during recording.
Level display
SRS 3D
MODE
/DEMO
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
The level
decreases. The level
increases.
÷ Adjustment is possible in the range from -8 to +8.
÷ Please set as desired according to the titles being played back etc.
L + 5 E V E L
LE V E L R s s
SRS LEVEL
S.W. (Except for the XD-A700)
L/R BALANCE
3D O N R s s
| Scrolled display (SRS 3D ON)
SRS 3D
To cancel SRS 3D