Konica Minolta Network Setup - Manual (Page 16)

4 Changing the Device Setup
11
4 Changing the Device Setup
Use the Device Setup dialog to change a device setup.
The following are the settings that can be configured when changing a
device setup.
• Device Information
• TCP/IP
• NetWare Print
4.1 Configuring Device Information
Perform the following steps to configure device information.
1.
On the device list, click the icon of the device whose information
you want to configure.
2. Select Device Setup on the Setup menu to display the Device
Setup dialog box.
You could also click the toolbar button.
3. Click the General tab.