Konica Minolta Network Setup - Manual (Page 30)

5 Option Setup
25
3. Put a check mark into the box next to option you want to use under
Select Protocol . You must select at least one protocol, however
both can be selected.
Click the
Return to standard setting button to return to the
protocol to the standard default.
4. Click the OK button.
5. On the confirmation dialog box that appears, click the OK button.
5.2 Specifying the Search Range
When using IP protocol, perform the steps below to specify the
network device search range. Note that you cannot specify the search
range when using IPX protocol.
1.
Select Option on the Setup menu to display the Option dialog box.
2. Click the Specify Search Range tab.
3. A check mark is in the box next to the protocol that is currently
selected on the
Select Protocol tab. See 5.1 Selecting a Protocol
for details about changing the protocol setting.