Maintenance work on chassis and engine – KTM 990 User Manual

Page 65

Advertising
background image

Main fuse

The main fuse protects all of the motorcycle's current consumers. The main fuse is located

in the starter relay under the right engine cowl. Remove the screws

[1] and take off the

engine cowl

[2].

Do not burn yourself on the hot exhaust pipe.

Lift the starter relay

[3] out of the bracket, remove the cap [4] and check the main fuse [5].

A spare fuse

[6] (30 ampere) is also plugged into the starter relay.

Replace a blown fuse only with an equivalent one. Visit an authorized KTM workshop if the

new fuse blows again.

Under no circumstances is a stronger fuse allowed to be set in or a fuse allowed to be “repaired”.

An inexpert treatment could damage the whole electrical installation!

MAINTENANCE WORK ON CHASSIS AND ENGINE

»

64

2

1

1

1

3

4

6

5

ABS fuses – models with ABS (antilock brake system)

Two fuses for the ABS are located under the starter relay. Remove the caps and check the

fuses

[7] and [8]. Replace blown fuses with the same type of fuse. Visit an authorized KTM

workshop if the new fuse blows again.

Under no circumstances is a stronger fuse allowed to be set in or a fuse allowed to be “repaired”.

An inexpert treatment could damage the whole electrical installation!

Spare 25 and 40-ampere fuses are located next to the fuse box in the storage compartment

in front of the seat.

7

8

Advertising