Kodak 6J7611A - Manual (Page 24)

3-8 A-61500 May 2010
Adjusting the
optional short
document tray The short document tray is available for scanning smaller documents.
This tray is standard with the Kodak i700 Series Scanners. If you have
a Kodak i600 Series Scanner, the short document tray can be ordered
from Parts Services. See Chapter 5, “Supplies and Consumables” for
ordering information.
1. Remove the end stop on the output tray.
2. Slide the short document tray on the rail of the output tray and push
it up to the desired position to accommodate your documents.
3. Adjust the side guides as necessary.