Konica Minolta DYNAX 3 User Manual

Page 19

Advertising
background image

AUT

OMA

TIC

OPERA

TION

ISO 100

37

36

While pressing the flash-mode
button

, turn the control dial

until

appears on the data

panel.

• The flash will not fire even if the built-in

flash pops-up.

Use the fill flash when taking pictures under fluorescent lighting or to
eliminate harsh shadows. When set, the flash will fire every time a
picture is taken.

Use the flash cancel when photographing twilight scenes or to capture
the ambiance of the existing light.

While pressing the flash-mode
button

, turn the control dial

until

appears on the data

panel.

• To return to autoflash mode, repeat the

step above until

appears.

A shortcut for single shots with fill

flash in autoflash mode can be made.
Hold the flash-mode button down when
pressing the shutter-release button to
fire the fill flash.

• To return to autoflash mode, repeat the step above until

appears.

• The shutter speeds will be slow in low-light situations. The use of a tripod is

recommended.

Fill Flash

Flash Cancel

Custom Function Notes

Cust-8: Autoflash will be set in P mode (1), flash cancel will be set in P

A

mode

(2) or Ps mode (3) (p.109).

• Remove the lens hood before using the built-in flash.
• Lens shadowing may occur with the following lenses at the shorter focal

lengths.
AF Zoom 28-70mm f/2.8G
AF Zoom 17-35mm f/3.5G
AF Zoom 28-135mm f/4.0-4.5
AF Zoom 28-85mm f/3.5-4.5

• The built-in flash can not be used with the following lenses:

AF 300mm f/2.8 (APO tele)
AF 600mm f/4.0 (APO tele)

Do not use the built-in flash with focal lengths shorter than 28mm. The
built-in flash cannot cover lenses wider than 28mm.

Make sure you are at least 1m (3.3 ft.) from your subject when using the
built-in flash.

Flash Range

Lens shadowing occurs when the lens or lens hood blocks part of the
output from the built-in flash. Lens shadowing appears as a semi-circular
shadow area at the bottom (horizontal pictures) or side (vertical pictures)
of the image

.

Lens Shadowing

USING THE BUILT-IN FLASH

f/4.0

f/5.6

1.0 ~ 3.0m /

3.3 ~ 9.8 ft.

1.0 ~ 2.1m /

3.3 ~ 6.9 ft.

ISO400

1.0 ~ 6.8m /

3.3 ~ 22.3 ft.

1.0 ~ 6.0m /

3.3 ~ 19.7 ft.

1.0 ~ 4.3m /

3.3 ~ 14.1 ft.

The range of the built-in flash depends on the speed of the film and the
selected aperture. Make sure your subject is within the flash range
specified in the table below.

f/3.5

1.0 ~ 3.4m /

3.3 ~ 11.2 ft.

Advertising
This manual is related to the following products: