Konica Minolta DYNAX 3 - Manual (Page 41)

DET
AILED
OPERA
TION
81
Insert the plug into the
terminal.
• When removing the Remote Cord
RC-1000S or RC-1000L, take care
not to pull out the remote-terminal
cover with the Remote Cord.
• The Remote-cord Clip (sold
separately) can be used to attach
the remote cord to the camera
strap.
Attaching the Remote Cord (Sold Separately)
Using the Remote-Control with Bulb(Sold Separately)
Open the remote-control-
terminal cover.
Press release button again
to close the shutter.
1
3
2
To reduce the camera shake or for long exposures, the shutter can be
released with the Remote Cord RC-1000S or RC-1000L.
• Do not use the Wireless Controller IR-1N with this camera. Its use may
permanent damage the camera.
To reduce camera shake, use the optional remote-control IR-3. (sold
separately) (p.49).
Set the camera to remote-
control mode (p.49). 1
Press the release button to
open the shutter.
• Hold the remote control near the
sensor on the grip. Take care not to
stand in front of the lens.
2
Emitter window
Delayed button
Release button
80
Press and hold the shutter-
release button to take the
picture.
• The shutter remains open as long as
the button is pressed.
6
Firmly press the eyepiece
cap into the eyepiece.
• The eyepiece cap prevents light from
entering through the viewfinder and
fogging the film.
5
Compose the scene and
focus on your subject.
• If the scene is too dark for the
autofocus to operate, press the
focus-mode switch and focus the
lens manually (p. 74).
While pressing the exposure-
compensation button, turn
the control dial to select the
aperture.
3
TAKING TIME EXPOSURES (buLb)
4
Focus-mode switch
Exposure-
compensation
button
Control dial