Konica Minolta DYNAX 3 - Manual (Page 53)

CUST
OM
FUNCTIONS
105
Turn the function dial to
CUST.
While pressing the function
button, turn the control dial
to select the desired setting.
Turn the function dial to any
position other than CUST.
• If the function dial is set to CUST,
the camera can take photographs,
but all buttons and switches, except
for the shutter-release button, are
disabled.
• Custom settings must be reset
manually, and are not effected by
the program-reset button or by
turning the camera off.
Using the custom functions, you can tailor camera settings to suit your
shooting style or preferences. Initially all the custom functions are set to
1. The functions are explained on pages 106 - 112.
Setting Custom Functions
4
Turn the control dial to
select the custom function
number to be changed. 2
3
1
Setting
Cust
1
AF / Shutter-
release Priority
1 AF Priority
2 Shutter-release Priority
1 Automatic
2 Manual
1 Film Tip Rewound
2 Film Tip Left Out
1 DX Memory Off
2 DX Memory On
1 Shutter-release Lock Off
2 Shutter-release Lock On
1 Focus Hold
2 Continuous Autofocus
1 AF Illuminator On
2 AF Illuminator Off
1 Normal P Mode
2 P A Mode
3 Ps Mode
Cust
2
Film Rewind Start
Cust
3
Film Tip
106
106
107
107
107
108
108
109
Cust
4
DX Memory
Cust
5
Shutter-release
Lock (Film)
Cust
6
Focus-hold
Button (Lens)
Cust
7
AF Illuminator
(built-in flash)
Cust
8
P Mode Settings
1 Select Spot Focus Area
2 Select Focus Area
3 Switch Between the Wide Focus And Spot Focus
1 Hold to Activate
2 Press Once to Activate, Press Again to Cancel
1 ADI Flash Metering
2 TTL Flash Metering
Cust
9
Spot AF Lock
Button
Cust
10
Spot-AE Lock
Button
104
Cust
11
Flash Metering
1 Shutter cannot be released if a lens is not attached. Cust
12
Shutter-release
Lock (Lens) 2 Shutter can be released if a lens is not attached.
109
110
111
112
Function
CUSTOM FUNCTIONS