Kobe Range Hoods CX1830GS-8 - Manual (Page 8)

6
Hood Installation
CAUTION: If required to move the cooking range to install the hood, turn off the power in an
electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS
RANGE.
1. Peel protective film off duct cover and hood, if any. Pull out
duct cover (inner and outer) from range hood.
Shown in Figure 3
Figure 3
2. Align glass canopy to hood body. Shown in Figure 4. Attach the glass canopy to body
with four hexagon screws and four spacers (provided). Tighten with hexagon wrench
(provided). Shown in Figure 5
Figure 4 Figure 5
3. Attach the LED screen and control panel with two hexagon
screws and two spacers (provided). Tighten with hexagon
wrench (provided).
Shown in Figure 6
Figure 6
Figure 1 Figure 2