Kenwood KDC BT948HD - Manual (Page 29)

English |
29
Make a Voice Dialing Call
1
Enter Bluetooth mode
Press the [
] button.
2
Select voice recognition mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Voice Recognize”.
3
“PB Name?” is displayed.
When a beep is heard, say the name within 2
seconds.
4
“PN Type” is displayed.
When a beep is heard, say the category name
within 2 seconds.
5
Make a call
Press the [VOL] knob.
✍ This step is the same as step 4 of the procedure
in
<Calling a Number in the Phone Book> (page
28) . You can make a call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. Refer to
<Troubleshooting Guide> (page 72) .
• Both the name and category require registration of
a voice tag. Refer to <Setting a Voice Command for
Category> (page 53) .
• Audio sound is not output during voice recognition.
Registering to the Preset Dial Number
List
1
Select the phone number you wish to register
Select the phone number with reference to the
following:
- Calling a Number in the Phone Book (page 28)
- Calling a Number in the Call log (page 28)
- Dial a Number (page 28)
2
Enter Preset Memory mode
Press the [VOL] button for at least 1 second.
3
Select the Preset number to put in the
memory
Turn the [VOL] knob and press it for at least 1
second when the desired item is displayed.
Select preset number.
4
Determine the Preset number to put in the
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Exit the Preset Memory mode
Press the [MENU] button.
Display of Phone Number type
(category)
The category items in the Phone Book are displayed
as follows:
Display Information
“GENERAL” / “ ” General
“HOME” / “ ” Home
“OFFICE” / “ ” Office
“MOBILE” / “ ” Mobile
“OTHER” / “ ” Other