Kenwood KDC BT948HD - Manual (Page 45)

English |
45
Reference point
FRONT FRONT
SUB-W
REAR REAR
1.7 feet
4.9 feet
+0 feet
+3.2 feet
2.6 feet
+2.3 feet
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Car Type Fine Adjustments
Adjusting fine tuning of the speaker position
compensation value specified at
<Car Type
Selection> (page 44) .
Display Item Range
“Front” Front speaker 0 – 14.44 feet
“Rear” Rear speaker 0 – 14.44 feet
“SW” Subwoofer 0 – 14.44 feet
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Car Type Adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”
> “Car Type Adjust”.
4
Select the item you want to set
Operation type Operation
Selects the item. Turn the [VOL] knob.
Adjust each item. Press the [
4] or [¢] button.
Set the value. Press the [VOL] button.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.