Kenwood KDC BT948HD - Manual (Page 70)

Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory 5).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the cable up to the unit with it secured at
several positions using tape or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory 5
⁄
• Install the microphone as far as possible from the cell-
phone.
70
| KDC-X995/ KDC-BT948HD
Installation/Removing the Unit