Kohler SIPHON VORTEX LOW PROFILE ONE-PIECE TOILETS K-3402-EB - Manual (Page 7)

- 7 -
4. Place seat on toilet, centering the seat/cover bolts in
bolt holes as shown in Fig. #17.
French Curve Seat Installation
Fig. #17
Bolt
Washer
Nut
5. Align the nut on the seat/cover bolt.
6. After nut has been started on bolt, hold the nut in place
and drive the bolt from the top with a screwdriver until
tight.
7. Snap the hinged lids closed.
SERVICING THE FRENCH CURVE TOILET
SEAT (OLD STYLE)
ă1. Locate the single hinge. Align the post with the keyhole
in the seat and cover as shown in Fig. #18.
2. TO REMOVE FOR CLEANING. Lift seat and cover.
Slide to the left and remove.
3. TO REATTACH SEAT. Hold seat and cover in vertical
position. Align tongue of the single hinge with groove in
the mounting bar. Slide assembly sideways so tongue
enters groove and post enters keyhole at the same
time, as shown in Fig. #19.
French Curve Seat Removal
Fig. #18
Post
Keyhole Slot
Single Hinge
Tongue
Reattaching the French Curve Seat
Fig. #19
Single Hinge
Post
Mounting Bar