Samsung ITP5012L - Manual (Page 33)

© SAMSUNG Electronics Co., Ltd. Page 17
THINGS YOU SHOULD KNOW
6. Using a Function Code
Many of the OfficeServ system functions can be invoked by dialling function codes. Please refer to
the table below for the default function codes(these maybe changed in your system, refer to your
System Administrator.).
Dial Button Functions Dial Button Functions
2XX(Note) Station number 49 Flash
3XX(Note) Station number 53+grp+0 Delete from the group
7XX(Note) Trunk line 54+zone Page forward
8X Trunk group number 55+0/1/2/3/4 Page 0/1/2/3/4 internal zone
0 Trunk group number 55+5/6/7/8 Page 1/2/3/4 external zone
10+XXX Answer a call in standby mode 55+9 Page all the external zones
11 Set/Clear a call on hold 55+* Page all the zones
12+ XXX Pick up a call on hold from
another station
56 Meet Me Page pickup
13 Door open 59 Change to self station level
16+XXX Set speed dials 65 Direct call pickup
17 Dial the saved numbers 66 Group call pickup
19 Redial 67 Universal Answer
41 Leave a message 400 Cancel DND
42+XXX Cancel a message 401 Set DND
43 Set/Return a message 500-5XX
(Note)
Station Group
44 Reserve access to station/
Trunk line during a call
600 Clear all forwarding calls
45 Wait for a busy extension 601+XXX Forward all calls
46 Conference 602+XXX Call forward on busy
47 Enter a billing code 603+XXX Call forward on no answer
48 Assign a station message 604+XXX Call forward on busy/no answer
- Extension, trunk and station group numbers can be 3 or 4 digits.
- If the table above does not have the desired function code or the function code
does not match with the desired function, the system’s numbering plan may have
been changed, please consult with your System Administrator. NOTE