Samsung ITP5012L - Manual (Page 44)

Page 28 © SAMSUNG Electronics Co., Ltd.
GETTING STARTED
5.
The upper menu is displayed again.
6.
Select [2. IP] to display the current
IP address of the IP phone.
No address is displayed if an IP address
is not set.
Use the dial buttons [0]~[9] and [ ] to
enter a new IP address, and press the [Enter] button.
"
Be careful not to enter a duplicate
IP address since the data network will not
support duplicated IP addresses.
7.
Select [3. Netmask] to display the current
Netmask address of the IP phone.
To change the Netmask address,
enter a new address and press
the [Enter] button.
8.
Select [4. Gateway] to display the current
Gateway address of the IP phone.
To change the Gateway address,
enter a new address and press
the [Enter] button.