Types of signal tone, Changing the dial mode – Samsung ITP5012L User Manual
Page 39
© SAMSUNG Electronics Co., Ltd.
Page 23
THINGS YOU SHOULD KNOW
9. Types of Signal Tone
The types of signal tone used in this telephone system are described in the following table.
Signal
Tone Name
Usages
Signal Interval
Dial tone
A steady tone that indicates
you can begin dialling.
Ring back
tone
Indicates the station you dialled
is ringing.
Busy tone
Indicates the station you dialled
is busy.
Transfer tone
Indicates your call is being held
and you can dial another
station.
Confirmation
tone
Very short beeps that indicate
you have correctly set or
cancelled a system feature.
* The Signal Interval may vary for each country
.
10. Changing the Dial Mode
The OfficeServ system allows you to dial to the
local telephone network using either pulse
(mechanical) or tone dialling modes.
To change from pulse(mechanical) dial mode to
tone dial mode, press the [#] button while dialling
an external number. Then, every number pressed
after the [#] button will be transmitted in tone
mode(electronic mode).