Samsung ITP5012L - Manual (Page 41)

© SAMSUNG Electronics Co., Ltd. Page 25
GETTING STARTED
This chapter describes the procedure for setting the user environment after installing and
booting the ITP-5012L IP phone.
1. Entering the Environment Setup Mode
When the IP phone is first installed or the system settings have changed, you must set the data
network environment settings through the environment setup menu. This menu also allows you to
designate the TFTP server for upgrading the IP phones programs.
1.
Connect the power adaptor while pressing
the [Menu] button.
2.
The environment setup menu appears
on the LCD screen.
Press the [ ]/[ ] direction button
to move to between the menus, and press
the [Enter] button to select.
Setup Menu Structure
Setting items are built in the below structure.
1. Information
1. Version
2. Network
3. Load Option
4. MAC address
Manual IP DHCP PPPoE
2. Network
1. Mode
2. IP
3. Netmask
4. Gateway
1. Mode 1. Mode
2. ID
3. Password
3. Load & Upgrade
1. Load Option
2. Upgrade Program
3. Upgrade Bootrom
4. Format
4. System 1. Password(* Not Used)
5. Server
1. Server IP
2. ID
3. Password
6. Exit