Kenwood VZ-7000P - Manual (Page 12)

English
12
System Set Up Function
Adjusting the Touch Position
The touch panel can be adjusted if the position
touched and the operation performed do not
match.
Accurately touch the mark at the upper right.
Accurately touch the mark at the lower left.
When the mark at the lower left is touched, the
adjustment is completed and the system setup
menu screen reappears.
• If [ CANCEL ] is touched without touching the button
at the upper right, the adjustment is canceled and
the screen that was set before switching to the
system setup menu reappears.
• If [ CANCEL ] is touched after touching the button at
the upper right, the button at the upper right
reappears.
• If [ RESET ] is touched, the settings are reset to the
factory defaults and the setup menu screen
reappears.
NOTE
2
1
R E S E T C A N C E L
T O U C H P A N E L A D J U S T
P l e a s e T o u c h
t h e C e t e r o f
t h e B u t o n i n
R i g h t - T o p C o r n e r .
n
t t h e
Touch Panel Adjustment Screen
C-01177(H)-Eng 02.3.20 3:12 PM Page 12