Kenwood VZ-7000P - Manual (Page 23)

English
23
3
TV Control Function
(Operation available when the TV audio source is
selected.)
• 38 button
Each time you press the 38 button, the tuning mode
switches to auto 1, to auto 2 and manual.
• TUNE buttons
Press the 4 button to make decreasing seeks.
Press the ¢ button to make increasing seeks.
• FM+ button
Switch between the TV1, TV2 and video.
• AME button
Selects the band for auto memory entry.
Press the AME button.
Press the ¢ button or 4 button to start auto
memory entry.
3
2
1
Remote Control Function
3Basic Source Control Function
• SRC button
Each time you press the SRC button, the source mode
switches.
• The mode switches to the next mode from any mode
which cannot be used.
• The tuner mode, CD mode, tape mode and disc
changer mode will differ depending on the unit that is
connected.
• VOLUME buttons
Press the ª button to increase the volume.
Press the · button to decrease the volume.
• ATT button
Turn down the volume quickly. To return the volume
to its original level, press the button again.
• SP button
Switch to the built-in speaker mode.
• OPEN button
Open/Close the monitor.
The “ ” button cannot be used.
NOTE
NOTE
3Visual Function
• V.SEL button
Each time you press V.SEL button, the image video
will switch between the navigation, television and
video.
• MODE button
Each time you press MODE button, the screen mode
switches between the full, zoom, just, cinema and
normal.
• FNC button
Press the FNC button to switch the source control
screen.
Each time you press FNC button, the back picture in
the source control screen changes.
• AV OUT button
Each time you press AV OUT button, the AV output
mode switches between the normal, television and
video.
REMOTE CONTROL UNIT
RC-402
MODE SP
AME
OPEN
AV OUT V.SEL
ATT
DISC
M/S
TV/DVD
SRC
FM
AM
TUNE TRACK
FNC
VOLUME buttons
ATT button
AME button
AV OUT button
SRC button
FNC button
SP button OPEN button
V.SEL button
MODE button
FM+ button
¢ button
4 button
38 button
C-01177(H)-Eng 02.3.20 3:12 PM Page 23