Kenwood VZ-7000P - Manual (Page 5)

English
5
Monitor Control Function
Opening the Monitor
Set the vehicle’s parking brake.
Press the OPEN/CLOSE button. The monitor will
open.
The gear shift lever or other parts may interfere with
the monitor when it opens. If so, move the gear shift
lever (being sure to do so safely) before operating the
set. (The monitor is drawn back in automatically if it
cannot be opened normally due to an obstacle.)
The monitor cannot be opened unless the parking
brake is set.
Closing the Monitor
Press the OPEN/CLOSE button. The monitor will
close.
• The monitor cannot be closed unless the parking
brake is set.
• The position to which the monitor slides or angle
when the power is turned on can be set. (Refer to
the angle control screen on (Page 7).
Power Off
Hold down the OPEN/CLOSE button for one second
or more to turn the set’s power off.
Press the OPEN/CLOSE button to turn the power on.
If a center unit is connected, you cannot turn the
Power on/off on this unit. Please operate the power
on the center unit.
Switching the Monitor’s Picture
Each time you press the V.SEL button, the monitor’s
picture switches as follows:
NAV setting during "RGB"
▼
Television or Video (from AV IN terminal)
▼
Navigation (from I/F terminal)
NAV setting during "AVIN"
▼
Television or Video (from AV IN terminal)
▼
Navigation (from AV IN terminal)
NAV setting during "OFF"
▼
Television or Video (from AV IN terminal)
▼
Video (from AV IN terminal)
When the “VD2 MODE” setting to “VD”, the
switching items become the picture from VIDEO 2 IN
terminal. (Refer to AV setting screen(page 8))
You cannot view television and video pictures whilst
the vehicle is moving. To enjoy television and video
pictures, find a safe place to park and engage the
parking brake.
2CAUTION
NOTE
NOTE
NOTE
NOTE
2CAUTION
2
1
OPEN/CLOSE
FNC
V.SEL
SCREEN
MODE OPEN/CLOSE
C-01177(H)-Eng 02.3.20 3:12 PM Page 5