Kohler Power Systems 14/20RESA - Manual (Page 38)

TP-6804 12/11 38 Section 3 RDC2 Controller Operation
3.11 Generator Metering Menu
The generator metering menu displays the generator
voltage and frequency. See Figure 3-12.
Voltage Calibration
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and
serviced
by qualified electrical
personnel.
DANGER
The voltage calibration mode can be entered from the
Generator Metering menu. Contact a Kohler-authorized
distributor/dealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-12.
Generator ---->
Metering
Reset
Calibration
<---- Return
Reset
Calib? No
Volts:
123V
tp6804
Reset
Calib? Yes
Frequency:
12.3 Hz
Figure 3-12 Generator Metering Menu