15 ats status menu – Kohler Power Systems 14/20RESA User Manual

Page 41

Advertising
background image

TP-6804 12/11

41

Section 3 RDC2 Controller Operation

3.15 ATS Status Menu

ATS menus appear if a Model RXT transfer switch is
connected to the generator set. If no transfer switch is
connected, or another model ATS is connected to the
engine start connections, Remote ATS is displayed on
the ATS Status screen.

The ATS Status menu displays Model RXT transfer
switch and source information.

The voltage shown in these menus can be calibrated.
Follow the safety precautions at the beginning of this
manuals. Use a voltmeter to measure the line-to-line
voltage and follow the instructions in Figure 3-16 to
calibrate the voltage readings.

tp6810

Frequency:

12.3 Hz

ATS

---->

Status

Voltage:

123V

ATS Position:
Normal

Normal Status:
Not/Acceptable

Emerg. Status:
Standby

Reset
Calibration

<---- Return

Reset
Calib? No

Reset
Calib? Yes

Note: If there is no Model RXT transfer

switch connected to the generator set,
Remote ATS is displayed and the other
screens on this page do not appear.

Figure 3-16 ATS Status Menu, with Calibration

Advertising
This manual is related to the following products: