Manual lowering to park position – Kathrein MobiSet 2 Digital CAP 600 User Manual

Page 30

Advertising
background image

30

If a defect arises in the electronic controls, after some disassembly work the
satellite dish can be returned to the park position (horizontal position) manually.
Following this however recalibration by an authorised workshop is always necessary.

Driving to the nearest workshop with the antenna extended at a moderate speed
and taking into account the increase (+ 72 cm) in the vehicle height is an option
and is preferable to manual lowering.

Users who are not familiar with the necessary repair work are urged not to
manually retract the antenna into park position themselves. They should contact a
technician or engineer. They may fi nd a suitable person on the campsite.

In any case, the safety instructions listed below must be followed.

Make sure that:

- The antenna and connected units are disconnected from the power
- The person carrying out the repair does not suffer from vertigo and can move

around safely on the roof of the caravan or motor home

- The person carrying out the repairs is wearing sturdy and non-slip shoes
- The person carrying out the repairs has a secure position to stand and hold

on while working

- The roof and the climbing equipment used (e.g. ladder) are dry, clean and

non-slip

- The roof can withstand the weight of the person carrying out the repairs

Caution! Risk of death or injury due to calling or roof collapsing!

- Do not hold onto the antenna, as the rocker comes free without warning

during dismantling

Caution! Risk of death and injury due to falling or crushing!

- Nobody should be inside the caravan / motor home underneath the antenna

during dismantling/installation.

Caution! Risk of death or injury due to possible roof collapsing and
falling parts!

MANUAL LOWERING TO PARK POSITION

SAFETY NOTES

Advertising