Kathrein MobiSet 2 Digital CAP 600 - Manual (Page 48)

48
At the margins of the footprints of a satellite (e.g. after a slight change of position), it may be necessary for
you to manually correct the setting (not normally required). It is also possible to manually correct the fi ne
tuning.
Press the

button to return to the main menu. By using the

buttons and the button you can call
up sub-menus (“Settings”, “Antenna Confi guration”).
MANUAL CORRECTION
You can correct the inclination and horizontal angle of the antenna using the “Elevation” and “Azimuth
direction” settings. To do this press the

buttons or enter a numeric value using the numeric keys
and confi rm with button. Check your settings by referring to the “Signal-Strength” and “Signal-Quality”
bars on the right-hand side. The higher the bar, the stronger and better quality the signal received.
The new co-ordinates are not assigned
to the satellite until you have saved
the satellite position when exiting the
“Antenna Confi guration” menu!
When you have performed the correction, press the

button to exit the menu. You will be asked whether
you wish to save the changes.
Press one of the

buttons (“Yes, save the changes” or “No, don’t save changes”) and confi rm by
pressing the button.
ALIGNMENT (SATELLITE SEARCH)