Checking the condition of the machine, Next – Kyocera FS-C1020MFP User Manual
Page 413
Top Page
>
> Checking the Condition of the Machine
Checking the Condition of the Machine
If there is a problem with the quality of printing, first check the condition of the machine.
Possible Cause
Solution
There is a problem with the machine's location.
Make sure that the machine is on a level surface. Place the
machine where it will not be subject to vibration or shock.
Unsupported types of paper is used.
Make sure that the paper being used is supported by the
The paper type setting is incorrect.
Make sure that the paper type setting of the printer driver
matches the type of paper loaded. See
.
A non-genuine print cartridge is being used.
Refilled or non-genuine print cartridges reduce print quality and
can cause malfunctions. Use genuine print cartridges only. See
An old print cartridge is being used.
Print cartridges should be opened before their expiration date
and used within six months of being opened.
The machine is dirty.
, and clean the machine as required.
Color degradation has occurred.
Color degradation may occur in color printing after the machine
is moved or a large number of pages are printed. In this case,
adjust color registration by executing [Color Regist.] in
[Machine Settings].
Copyright © 2009
Contents