Kyocera FS-C1020MFP - Manual (Page 48)

Top Page > Guide to the Machine > Feature Highlights > Using the Machine as a Copier > Copying both sides of an ID card onto one side
of paper
Copying both sides of an ID card onto one side of paper
You can copy the front and back sides of an ID card, or other small document, onto one side of a sheet of
paper.
●
This function is only available when the original is set on the exposure glass, not when it is set in the ADF.
You can either set this machine to always make photocopies in ID card copy mode, or use this function
only when necessary.
Preparation for copying an ID card
To always make photocopies in ID card copy mode:
1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see Copy Settings .
To use this function for the current job only:
1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.
For details, see Copying Both Sides of an ID Card onto One Side of Paper .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings