Kyocera FS-C1020MFP - Manual (Page 52)

Top Page > Guide to the Machine > Feature Highlights > Using the Machine as a Scanner > Scanning from a computer
Scanning from a computer
You can operate the machine from your computer and scan originals into your computer directly.
Preparation for scanning from a computer with USB connection
1. Connect the machine to the computer using a USB cable, and install the scanner driver on the
computer.
For details, see
Connecting with USB Cable and Driver Installation Guide.
2. If a TWAIN-compliant application is not installed on the computer, install a TWAIN-compliant
application.
Preparation for scanning from a computer with network connection
1. Connect the machine to the network.
For details, see Connecting with Network Cable .
2. Configure the IP address, subnet mask, and gateway address using the control panel.
For details, see Configuring the IP Address Settings .
3. Install the scanner driver on the computer.
For details, see Driver Installation Guide.
4. If a TWAIN-compliant application is not installed on the computer, install a TWAIN-compliant
application.
Top Previous Next
Copyright © 2009
Contents Previous Next Settings