Recording on md, Dc t 0 1, Make the preparations for recording – Kenwood HM-DV6MD User Manual
Page 38: Select the source to be recorded
38
Recording on MD
Basic section
VOLUME/
MULTI CONTROL
STANDBY
/TIMER
DVD/CD
6
MD
6
4
¢
DVD/CD
0
MD
0
STOP
7
TUNING MODE
TUNER/
BAND
AUX
SOUND
MODE
SET/DEMO
REC MODE
MD REC
P.CALL
D
C
T 0 1
2
1. Make the preparations for recording.
Recording on MD
2. Select the source to be recorded.
Pause the recording
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force load a MD in standby mode, otherwise malfunction will
result.
1
Open the write protect tab of the MD to make it recordable.
©
2
Load the MD.
DVD (MP3, VCD, CD) : Press the DVD/CD
6 key.
TUNER (Broadcasts) : Press the TUNER/BAND key.
AUX (Analog) :
Press the AUX key repeatedly until "AUX" is displayed.
DIGITAL AUX (Digital) :
Press the AUX key repeatedly until "DIGITAL AUX" is displayed.
÷ When DVD/CD 6 or MD 6 is selected, playback will start when a disc
already has been inserted.
Press the
STOP
7/TUNING MODE
key to stop it.
÷ Recording of digital audio is possible only when the "CD" or "DIGITAL AUX"
source is selected. Also, even with these sources, the digital audio output
may be unable to be recorded due to the restriction by SCMS. (It is only the
analog audio that can be recorded when recording DVD Video, VCD or MP3
file playback on MD.)
c
Select an input source other
than "MD"
The character information display shows
the recording input source.
Stop the recording
DVD/CD
6
2
2
2
2
In the direction of the arrow
VOLUME/
MULTI CONTROL
STANDBY
/TIMER
DVD/CD
6
MD
6
4
¢
DVD/CD
0
MD
0
STOP
7
TUNING MODE
TUNER/BAND
AUX
SOUND
MODE
SET/DEMO
REC MODE
MD REC
P.CALL
Insert with the shutter
facing upward
4
4
1
1
Even when the CD contains the recording of CD-TEXT data, the data is
not copied onto the MD.
Example:
To select the DVD/CD input