Kenwood HM-DV6MD - Manual (Page 76)

76
MD Edit Functions
Application section
C O M B I N E
0 1 + 0 0 2 0 ?
Combines two adjacent tracks into a single track. After this operation, the track numbers of tracks located
after the combined tracks are decreased automatically.
Combining two tracks
(COMBINE)
Select the track to be combined.
1
Select a track number.
2
Set it.
2
To decrease
track No.
To increase
track No.
Select “ COMBINE”.
Select the "MD" input ⁄
1
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode. It is not permitted to combine two tracks which are
recorded in different recording modes.
1
Press the TRACK EDIT key.
2
Select "COMBINE".
3
Set it.
SET
4 ¢
P.CALL
4 ¢
P.CALL
SET
Connecting tracks 6 and 7.
(If you combine tracks during playback,
go to step
3.)
TRACK EDIT
0 6 + 0 0 7 0 ?
÷ "COMBINE" cannot be selected if the track being
played is the first track on the disc.
÷ To combine two tracks during playback, press the TRACK
EDIT key while the second track is being played.
÷ To cancel the operation in the middle, press the TRACK
EDIT key any time before step
3
.
1 "MOVE"
2 "COMBINE"
3 "ERASE"
Each press of the
4 or ¢ keys switches the op-
eration.
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
When pressed in
stop mode
When pressed in play
mode