Kenwood HM-DV6MD - Manual (Page 82)

82
MD Edit Functions
Application section
1
Press the TITLE INPUT key.
2
Select "ALL ERASE".
3
Set it.
4
Press the ENTER key.
5
Complete the operation.
Execute title change or deletion.
3
1
Enter the title in memory.
2
Complete the operation.
÷ To continue editing of another title, repeat the above
procedure from step
1-2.
ENTER
TITLE INPUT
The title is scrolled automatically.
After editing, eject and remove the MD.
÷ The MD editing is established finally at the moment the
MD disc is ejected.
4
MD 0
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
Erasing all titles
TITLE INPUT
SET
Each press of the
4 or ¢ keys switches the op-
eration.
1 "DISC" : Disc title
2 "001", "002"..... : Track title
3 "ALL ERASE" : Complete erasure of disc
and track titles
4 "[1]", "[2]", "[3]": Title Memo
4 ¢
P.CALL
To return To advance
ENTER
TITLE INPUT
In regard to key function
CLEAR /DEL. key
Deletes the character on the cursor position and
shifts the subsequent characters leftward by one
column. An entire title can be deleted easily by
pressing the key repeatedly (or holding it de-
pressed).
1 or ¡ key
Moves the cursor position.
O R E . . S T
0 K E N W O 0 2
Information is
being written. MD has been ejected.
R I W T I N G
J E E C T
Press in stop mode