Kenwood HM-DV6MD - Manual (Page 72)

72
MD Edit Functions
Application section
Select "MOVE".
The following procedure shows you how to select a single tracks (track number) and move (insert) it at the
desired destination position in the series of track numbers. After the tracks have been moved, the track
numbers before and after them will be adjusted automatically. By repeating this operation, you can reor-
der the tracks in the desired order.
Moving a single track
(MOVE)
Select the "MD" input ⁄
1
1
Press the TRACK EDIT key.
2
Select "MOVE".
3
Set it.
SET
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
1
Select a track number.
2
Set it.
Select the track to be moved.
2
To decrease
track No.
To increase
track No.
4 ¢
P.CALL
÷ Pressing the key in the middle of playback initiates
pause.
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
4
.
1 "MOVE"
2 "COMBINE"
3 "ERASE"
TRACK EDIT
4 ¢
P.CALL
SET
0 1 0 M O V E ?
Each press of the
4 or ¢ keys switches the op-
eration.
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
When pressed in
stop mode
(To initiate TRACK MOVE during playback,
go to step
3.)
Track to be moved
M O V E
0 5 0 M O V E ?
When pressed in play
mode