Kenwood TK-2180 - Manual (Page 33)

27
P
RIORITY
S
CAN
A Priority channel must be programmed in order for Priority
Scan to function.
The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.
• The indicator represents the Priority 1 channel.
• The indicator represents the Priority 2 channel.
• The indicator represents both the Priority 1 and Priority 2
channel.
Note: Priority cannot be programmed onto the group ID of a
Trunking zone; it can be used only on channels of Conventional
zones.
G
ROUP
S
CAN
Group Scan is useful when more than one channel/ group ID
is programmed in a zone. Group Scan is set by your dealer
on request. It scans the revert groups as well as groups that
are allowed to be scanned.
When a call is received, the group indicator shows the
channel/ group ID, and that group becomes the revert group.
Simply press the PTT switch to respond to the call.