Kenwood TK-2180 - Manual (Page 40)

34
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
• “ ” appears on the display after confirming the
entered name.
4 Enter the desired number using the DTMF keypad or
the selector. When using the DTMF keypad, simply
enter the desired number, followed by the S key to
confirm the entry. When using the selector, rotate the
selector to select a digit, then press the C> key to
confirm the digit and move the cursor to the right.
Repeat this operation until the complete number is
entered, then press the S key to confirm the entry.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
• “ ” appears on the display after confirming the
entered number.
5 Press the S or key to store the entered name and
number in the Autodial list.
• Press the A or # key to cancel the entry.
• If you are overwriting a previous entry, “ ” appears
on the display. Press the S or key to overwrite the
entry, or press the A or # key to cancel.
■ D
IALING
S
TORED
DTMF N
UMBERS
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Rotate the selector, press the <B and C> keys, or
press the appropriate DTMF key (01 ~ 32) to select
your desired Autodial list number.
• The stored entry appears on the display.
3 Press the PTT switch to make the call.