Kenwood TK-2180 - Manual (Page 49)

43
B
ATTERY
S
AVER
If activated by your dealer, the Battery Saver function will
decrease the amount of power used when a signal is not
being received and no operations are being performed (no
keys are being pressed, and no switches are being turned).
While the channel is not busy and no operation is performed for
5 seconds, Battery Saver turns ON. When a signal is received
or an operation is performed, Battery Saver turns OFF.
B
ATTERY
P
OWER
I
NDICATOR
The battery power indicator displays the battery power
remaining, as illustrated below:
High power
Medium power
Low power
Very low power
When the transceiver power is very low, replace or recharge
the battery pack. If activated by your dealer, an alert tone will
sound every 30 seconds and the LED indicator will blink red
when the battery power is low.
S
IGNAL
S
TRENGTH
I
NDICATOR
The signal strength indicator displays the strength of received
calls:
Strong signal
Medium signal
Weak signal
Very weak signal