Setting up the docking station, Connecting the docking station to a computer, Connecting the docking station – Kodak 1500 User Manual
Page 28
Advertising
20 Chapter 3 Getting Started
Setting up the Docking Station
Connecting the Docking Station to a Computer
To connect the docking station to a computer, follow these
steps:
1
Connect the camera USB cable to the docking station (1).
Figure 12 Connecting the Docking Station to a Computer
2
Connect the computer USB cable to the docking station
(
2)
.
3
Connect the other end of the USB cable to the computer
USB port.
4
Connect the DC power supply into the docking station (
3)
.
Note: The camera reverts to the idle mode
when it is in the holder. If the camera is in the
holder for more than one hour, it shuts down.
1
2
3
Advertising