Connecting the antenna to the docking station, Pairing the wireless camera to the docking station – Kodak 1500 User Manual
Page 34
26 Chapter 3 Getting Started
Connecting the Antenna to the Docking Station
To connect the antenna to the docking station, screw the
antenna into the connection on the right side of the docking
station. Make sure the antenna is screwed tightly into the
connection.
Figure 17 Docking Station with Antenna
Pairing the Wireless Camera to the Docking
Station
Wireless cameras are paired at the factory to the docking
station that is shipped with the camera.
The need to pair again a wireless camera to a docking station
happens when:
•
The original camera or docking station needs to be
replaced.
•
The user wishes to use one camera with two or more
docking stations that are connected to computers in
individual operatories. The pairing of one camera to two
or more docking stations can only be used when
Antenna