Pairing one camera to one docking station – Kodak 1500 User Manual
Page 35
KODAK 1500 Intraoral Camera User’s Guide (8J2862)_Ed02
27
acquiring images using a computer, and not when
acquiring images using a video monitor.
Pairing One Camera to One Docking Station
To pair one camera to one docking station, follow these steps:
1
Plug in the DC power cord and connect it to the docking
station.
2
Connect the USB cable from the rear of the docking station
to an open computer USB port.
3
Connect the camera USB cable from the front of the
docking station to the camera.
4
Power ON the camera.
5
Open KODAK dental imaging software and the acquisition
module in order to see live video on the computer.
6
Perform the pairing by continuously pressing down on both
the camera Power On button and the Shutter Release
button for at least five seconds until the following message
appears on the computer monitor: "Docking station and
Camera have paired successfully".
7
After pairing the docking station, replace the USB cable on
the camera with a charged battery.
8
Restart the camera and operate it in wireless mode.
The camera can now be safely powered OFF. When you
restart the camera, the blue WiFi indicators on the camera
and the active docking station are ON.