Lowrance electronic Lowrance iFINDER Explorer - Manual (Page 28)

20
6. EXIT – The Exit key lets you return to the previous screen, clear
data or close a menu.
7. FIND – The Find key launches the iFINDER search menus and
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom out the screen to see a
larger geographic are on the map. Less detail is seen as you zoom out.
9. ZIN – (Zoom In) – This key lets you zoom in the screen to see greater
detail in a smaller geographic area on the map.
Power/lights on and off
To turn on the unit, press PWR . To turn on the backlight, press PWR
again. Pressing PWR again will turn off the backlight. Press EXIT to
message or alarm displays.
Turn off the unit by pressing and holding the PWR key for 3 seconds.
Main Menu
Easy Mode has a single Main Menu, which contains function and setup
option commands. The lessons in this section will deal only with functions
— the basic commands that make the iFINDER do something. The
iFINDER will work fine for these lessons with the factory default settings.
But, if you want to learn about the various options, see Sec. 5, System
Setup and GPS Setup Options.
Main Menu, Easy Mode.
The Main Menu commands and their functions are:
Go To Cursor: navigates to the current cursor position on the map
Cancel Navigation: turns off the navigation command after you have
reached your destination.
Screen: changes the contrast or brightness of the display screen and
backlight delay.