Lowrance electronic Lowrance iFINDER Explorer - Manual (Page 91)

83
Map Data
The Map Data menu lets you turn off the map — which turns the map
screen into a GPS plotter — turn on or off pop-up map info boxes, draw
map boundaries or boxes around areas of detail and fill land areas with
gray. You can also turn on or off Map Overlays, which display range
rings and latitude and longitude grid lines on the map. Navionics maps
also may be accessed on the Map Data menu. For detailed instructions,
see the Navionics Charts entry in this section.
Map Menu (left) with Map Data Menu (right).
To Show Map Data
Press
MENU |
↓ to
M AP D ATA
| ENT . Press ENT to access the E ARTH M AP
D ETAIL
selection list. From there, choose how much detail you want,
ranging from Off (so the unit operates like a GPS plotter) to High. After
the option is set, press
EXIT .
Popup Information
From the Map Data menu, press
↓ to
P OPUP I NFORMATION
. With the option
highlighted, press ENT to turn it on (check) or turn it off (uncheck). Af-
ter the option is set, press EXIT .
Draw Boundaries
From the Map Data menu, press
↓ to
D
RAW
B
OUNDARIES
. With the option
highlighted, press ENT to turn it on (check) or turn it off (uncheck). Af-
ter the option is set, press EXIT .
Fill Land with Gray
From the Map Data menu, press
↓ to
F
ILL
L
AND WITH
G
RAY
. With the op-
tion highlighted, press ENT to turn it on (check) or turn it off (uncheck).
After the option is set, press EXIT .
Map Overlays (Range Rings, Lat/Long Grid)
The map screen can be customized with range rings and/or grids that
divide the plotter into equal segments of latitude and longitude. Range
rings are handy for estimating distances on the map. Ring diameters