Lowrance electronic Lowrance iFINDER Explorer - Manual (Page 87)

79
turn on (check) or turn off (uncheck) the selected data option. Check or
uncheck other data options to change the data displayed in other boxes.
If you get an Overlay Limit Exceeded message, you must turn off (un-
check) a data category before you will be able to add another category.
When you are satisfied with the changes, press
EXIT .
Customize Map Page
While on the Map Page press
MENU |
↓ to
C
USTOMIZE
| ENT . Use
↓ or ↑ to
highlight the data option you want to display and press ENT , which will
turn on (check) or turn off (uncheck) the selected data option. Check or
uncheck other data options to change the data displayed in other boxes.
If you get an Overlay Limit Exceeded message, you must turn off (un-
check) a data category before you will be able to add another category.
When you are satisfied with the changes, press
EXIT .
External Passive Antenna
The iFINDER Explorer can be used with an optional external antenna.
While we recommend the more powerful external active antenna, the
unit can also operate with an external passive antenna. To do this, mod-
ify the settings so the unit will look for an external passive antenna
rather than an external active antenna.
From the Satellite Status page, press MENU |
↓ to
E XT P ASSIVE A NT
. Press
ENT to turn on (check) or turn off (uncheck) the External Passive an-
tenna command.
Remote Passive Antenna command on the Satellite Status Menu.
WARNING:
As long as the External Passive Antenna command is acti-
vated, the iFINDER will only monitor GPS signals from an
external passive antenna. If you have this command acti-
vated and are not using an external passive antenna, the
unit will not be able to accurately lock on. To switch back
to the iFINDER's internal antenna (or to use an optional
external active antenna), be sure to turn off this command.