Lowrance electronic Lowrance iFINDER Explorer - Manual (Page 86)

78
Press
↓ to
S
ELECT
O
RIGIN
| ENT , which will launch the Select Point window
with three options: My Waypoints, Map Places and Highway Exits. If
you saved the reference point as a waypoint, choose
M
Y
W
AYPOINTS
by
pressing ENT | ENT , which will bring up the Waypoint list with the way-
point nearest your location at the top. Use the
↓ ↑
keys to select the
waypoint you want to assign as a reference point and press ENT . The
unit displays a waypoint information screen with the command S
ET
A
S
O RIGIN
selected. Press ENT and the unit returns to the Configure Map
Fix menu. Press EXIT to close this menu. Now press
↑ to
C OORD S YS-
TEM
| ENT , select M AP F IX
from the list and press ENT . All position infor-
mation now will be shown as a distance from the reference waypoint
you chose. Press
EXIT repeatedly to return to the main page display.
Customize Page Displays
The Digital Data, Navigation, Compass and Map pages all have cus-
tomizable options available in Advanced Mode. The options give you
control over what information will be viewed on each page.
Customize Digital Data Page
While on the Digital Data Page, press
MENU |
↓ to
C USTOMIZE
| ENT . A
data box begins to flash. Use the arrow keys to select a box containing
data you want to change. With the desired box highlighted and flash-
ing, press
ENT to open a list of data options. Use
↓ ↑ to select a data
category, then press ENT . You will be directed back the Digital Data
page, where the new data will be displayed in the data box you selected.
You can repeat these steps to change the display in another box. When
you are satisfied with your changes, press
EXIT .
NOTE:
To change the data in the large data box at the top of the Digital
Data page use the
↑ ↓ keys. There are three data options you can
rotate through: Position, Altimeter History and Pressure History.
Customize Navigation Page
While on the Navigation Page press
MENU |
↓ to
C
USTOMIZE
| ENT . Use
↓ ↑
to select a data option you want to display and press ENT , which will
turn on (check) or turn off (uncheck) the selected data option. Check or
uncheck other data options to change the data displayed in other boxes.
If you get an Overlay Limit Exceeded message, you must turn off (un-
check) a data category before you will be able to add another category.
When you are satisfied with the changes, press
EXIT .
Customize Compass Page
While on the Compass Page press
MENU |
↓ to
C USTOMIZE
| ENT . Use
↓ or ↑
to select a data option you want to display and press ENT , which will