Lowrance electronic Lowrance iFINDER Explorer - Manual (Page 52)

44
Power/lights on and off
To turn on the unit, press PWR . To turn on the backlight, press PWR
again. Pressing PWR once again will turn off the backlight. (Press EXIT
to clear any message or alarm displays.)
Turn off the unit by pressing and holding the PWR key for 3 seconds.
Main Menu
Advanced Mode has a single Main Menu, which contains some function
commands and some setup option commands. The instructions in this
section will deal only with functions, the basic commands that make
the iFINDER do something. The iFINDER will work fine for these in-
structions right out of the box with the factory default settings. But, if
you want to learn about the various options, see Sec. 5, System Setup
and GPS Setup Options.
1. To get to the main menu from any page, press MENU | MENU . To clear
the menu screen and return to the page display, press EXIT .
Main Menu, Advanced Mode.
The Main Menu commands and their functions are:
Screen: changes the contrast or brightness of the display screen and
backlight delay.
Sounds: enables or disables the sounds for key strokes and alarms and
sets the alarm style.
Alarms: changes alarm thresholds and allows users to turn on or off
GPS alarms.
Route Planning: allows you to plan, view or navigate routes.
My Trails command: used to show, create, edit or delete trails.
Cancel Navigation: turns off the navigation command after you have
reached your destination.