LevelOne ViewCon KVM-0850 - Manual (Page 61)

KVM-0850/1650 IP KVM switch
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may be left
empty, however the KVM-0850/1650 will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used in case
the Primary DNS Server cannot be contacted.
Remote Console And HTTPS port
Port number at which the KVM-0850/1650's Remote Console server and HTTPS server
are listening. If left empty the default value will be used.
HTTP port
Port number at which the KVM-0850/1650's HTTP server is listening. If left empty the
default value will be used.
Telnet port
Port number at which the KVM-0850/1650's Telnet server is listening. If left empty the
default value will be used.
Bandwidth limitation
The maximum network traffic generated through the KVM-0850/1650 ethernet device.
Value in Kbit/s.
Enable Telnet access
Set this option to allow accessing the LARA express using the Telnet
Gateway see the Section called Telnet Console ).
Disable Setup Protocol
Enable this option to exclude the KVM-0850/1650 from the setup protocol.
61