LevelOne ViewCon KVM-0850 - Manual (Page 53)

KVM-0850/1650 IP KVM switch
6.3.2 Users And Groups
Figure 6-13. Set User
The KVM-0850/1650 comes with 2 pre-configured user accounts that have fixed permissions.
The account super has all possible rights to configure the device and to use all functions
KVM-0850/1650 offers. The account “user” has only the permission to open and use the
Remote Console. Even his user name and password can only be changed by the super
account.
Upon delivery, both accounts have the password pass. Make sure to change these
passwords immediately after you have installed and firstly accessed your KVM-0850/1650.
While the “user” account never sees the following options, the user “super” account can
change the name and password for both accounts.
Existing users
Select an existing user for modification. Once a user has been selected, click the lookup
button to see the user information.
New User name
The new user name for the selected account.
Password
The password for the login name. It must be at least four characters long.
Confirm password
Confirmation of the password above.
53